Microlon Oil, Gun Juice, Sportsman's kit

faith address


microlon sportsman

MICROLON SPORTSMAN KIT
Microlon Gun Juice -1 fl oz. Has the unique ability to create a complex, molecular compound that contains the highest quality cleaning agents, corrosion inhibitors and antioxidants. This causes Microlon to become part of the metal, not merely a temporary coating. There are two main characteristics of Microlon compound. First: The Ingredients in Microlon combine to prepare the pore structure of the metal to receive the Microlon Metal Treatment and provide lasting protection. Second: It makes the gunmetal self-lubricating under all environmental conditions.

Microlon Gun Juice should be used on all firearms in place of normal gun oil. Microlon Gun Juice is far superior to oils in that it provides excellent lubrication and is a "Dry Film" lubricant that will not attract dirt, dust or grit, which can permanently damage a firearm.
Microlon Assembly Lubricant -3/4 oz. Provides excellent rust and corrosion protection for long-term storage after assembly. It will not run off during storage, your firearm will be ready when the unit is returned to service. Because Microlon reduces friction in close fits, it will prevent many seizing and galling problems. Microlon Assembly Lubricant should be used on all moving parts during assembly. Lightly coat anywhere metal to metal contact occurs. Another unique feature of Assembly Lube is that it provides a protective non-greasy coating on all external metal when lightly applied and removed with a soft cloth.

You may use the Assembly Lube on all sliding parts of a weapon, such as the guides for the slide mechanism on a semi-automatic, or the pump guides of a shotgun. Excess Assembly Lube should be removed with a soft, dry cloth before using the weapon.


microlon oiler

MICROLON OILER 0.25 fl. oz.
GENERAL PURPOSE METAL TREATMENT
Microlon's new Precision Oiler Lubricates those places that are difficult to reach, Gets to confined spaces to lubricate and prevent rust.
Perfect for fishing reels, firearms and other mechanical devices with small parts and where precise application is important.



Microlon Liquid Gun Juice FIREARMS TREATMENT
HANDGUN TREATMENT INSTRUCTIONS:
1. Clean the bore of the weapon thoroughly, removing copper, lead and carbon deposits, prior to application of Gun Juice. Microlon Gun Juice is an excellent cleaner, and when used with a bore brush, will remove fouling from your gun's bore, preparing the metal to receive our protective, microscopic dry film lubricant.
2. Before opening the container, SHAKE WELL.
3. Wet a patch with the Microlon Gun Juice and pull it the length of the inside of the barrel.
4. Fire the weapon and pull another patch through the bore.
5. Repeat until 8-10 patches with Microlon Gun Juice have been pulled the length of the barrel.
6. Re-sight the weapon, if possible.
7. Microlon Gun Juice may be applied to the moving parts of the firearm by wiping and polishing the parts with a soft cloth moistened with Gun Juice.
8. Microlon Gun Juice can also be used during routine cleaning and will improve the slide action in a semi-automatic. Drip Gun Juice down along the center rod and spin the cylinder to improve spinning action in revolvers. Remember to remove grips during routine cleaning. Microlon is a metal treatment and may damage a non-metal surface.
RIFLE & SHOTGUN TREATMENT INSTRUCTIONS:
1. Clean the bore of the weapon thoroughly, removing copper, lead and carbon deposits, prior to application of Gun Juice. Microlon Gun Juice is an excellent cleaner, and when used with a bore brush, will remove fouling from your gun's bore, preparing the metal to receive our protective, microscopic dry film lubricant. 2. Before opening the container, SHAKE WELL.
3. Wet a patch with the Microlon Gun Juice and pull it the length of the inside of the barrel.
4. Fire the weapon and pull another patch through the bore.
5. Repeat until 8-10 patches with Microlon Gun Juice have been pulled the length of the barrel.
6. Re-sight the weapon, if possible.
7. Microlon Gun Juice may be applied to the moving parts of the firearm by wiping and polishing the parts with a soft cloth moistened with Gun Juice.
8. Microlon Gun Juice can also be used during routine cleaning. Microlon is a metal treatment and may damage a non-metal surface, so if possible, remove stock and other non-metal parts while cleaning the weapon.
Material Safety Data Sheet and Technical Data Sheet available.

Web page Designed and Created by Brian Nemec
Copyright 2005
No part of this web page can be reproduced without permission of Brian Nemec